Nokia IP561, Installation Manual, Page: 13 / 96

Nokia IP561 Security Platform Installation Guide 13
About this Guide
This manual provides information for the installation and use of the Nokia IP561 security
platforms. Installation and maintenance should be performed by experienced technicians or
Nokia-approved service providers only.
This preface provides the following information:
„
In this Guide
„
Conventions this Guide Uses
„
Related Documentation
In this Guide
This guide is organized into the following chapters and appendixes:
„
Chapter 1, “Overview” presents a general overview of the Nokia IP561 security platform.
„
Chapter 2, “Installing the Nokia IP561 Appliance” describes how to rack-mount the
appliance.
„
Chapter 3, “Performing the Initial Configuration” describes how to physically connect the
Nokia IP561 security platform to a network and to a power source and how to make the
security platform available on the network.
„
Chapter 4, “Installing and Replacing Network Interface Cards” describes how to install,
monitor, and replace network interface cards (NICs).
„
Chapter 5, “Connecting PMC Network Interface Cards” describes how to connect to and use
each of the supported NICs.
„
Chapter 6, “Replacing Other Components” describes how to install or replace memory, hard
disk drives, the fan unit, power supply, battery, compact flash memory card, PC card, and the
Nokia encryption accelerator card.
„
Chapter 7, “Troubleshooting” discusses problems you might encounter and proposes
solutions to these problems.
„
Appendix A, “Technical Specifications” provides technical specifications such as interface
characteristics.
„
Appendix B, “Compliance Information” provides compliance and regulatory information.