Nokia IP561, Installation Manual, Page: 49 / 96

Nokia IP561 Security Platform Installation Guide 49
5 Connecting PMC Network Interface
Cards
This chapter describes the network interface cards available for the Nokia IP561 security
platform and how to connect those NICs to your network. The following NICs are described:
„
Four-Port 10/100 Ethernet NIC
„
Four-Port and Two-Port Copper Gigabit Ethernet NIC (10/100/1000)
„
Two-Port Fiber-Optic Gigabit Ethernet NIC
For instructions about how to add or replace NICs, see Chapter 4, “Installing and Replacing
Network Interface Cards.”
The NICs supported in the Nokia IP561 security platform operate at the peripheral component
interconnect (PCI) frequency listed in
Table 9 .
Caution
To protect the IP561 and the memory modules from electrostatic discharge damage,
make sure you are properly grounded before you touch these components. Use a
grounding wrist strap and follow the instructions provided with the wrist strap before
you handle the components or open the appliance.
Table 9 NIC PCI Frequency
NIC or interface port
Maximum PCI operation
supported
Four-port 10/100 Ethernet 133 MHz
Four-port copper Gigabit Ethernet
(10/100/1000)
Two-port copper Gigabit Ethernet
(10/100/1000) 133 MHz
133 MHz
Two-port fiber-optic Gigabit Ethernet 133 MHz