Nokia IP561, Installation Manual, Page: 40 / 96

Performing the Initial Configuration
40 Nokia IP561 Security Platform Installation Guide
For details, see “Multi-Mode Fiber-Optic Gigabit Ethernet NIC Features” on page 55.
Using Nokia Network Voyager
Use Nokia Network Voyager to configure and monitor your appliance. For additional
information about how to use Network Voyager, see
“Viewing Nokia IPSO-VN Documentation
by Using Nokia Network Voyager” later in this section.
To open Nokia Network Voyager
1. Open a Web browser on the host you plan to use to configure or monitor your appliance.
2. In the Location or Address field, enter the IP address of the initial interface you configured
for the appliance.
You are prompted to enter the
admin username and the password you entered when you
performed the initial configuration.
Note
If the username login screen does not open, you might not have a physical network
connection between the host and your appliance, or you might have a network routing
problem. Confirm the information you entered during the initial configuration and check
that all cables are firmly connected. For more information, see the troubleshooting
section in the installation guide for your appliance.
Viewing Nokia IPSO-VN Documentation by Using
Nokia Network Voyager
The following documentation is available in Nokia Network Voyager and is accessible from the
Network Voyager interface, as shown in
Figure 9 .
„
Nokia Network Voyager Inline Help—You can access inline help when you use Nokia
Network
Voyager. Inline help is the context-sensitive information source for
Network
Voyager. To access inline help for the window you are viewing, click Help.