memory card is pointing towards the SIM card slot
and the contact area is facing downwards. Note
that the back cover must be in place so that the
device recognizes the memory card.
3. Insert the battery. Align the contacts of the battery
with the corresponding connectors on the battery
compartment.
4. Insert the locking catches of the back cover into the
corresponding slots, and slide the cover into place.
Charging the battery
1. Connect the charger to an AC wall outlet.
2. Connect the power cord to the bottom of the device.
See Figure Keys and connectors on page 13 The
battery indicator bar starts scrolling. If the battery is
totally discharged, it may take a few minutes before
the charging indicator is shown. The device can be
used while charging.
3. When the battery is fully charged, the bar stops
scrolling. Disconnect the charger from the device
and then from the AC outlet.
Switching the device on and
off
•
To switch the device on, press and
hold the power key. The
communicator can be used without
the phone functions when a SIM
card is not inserted or when the
Offline
profile is selected.
•
If the device asks for a PIN or security code, enter
the code, and press
OK
.
•
To switch the device off, press and hold the power
key.
Tip:
When you switch the device on, it
recognizes the SIM card provider and
configures the correct text message,
multimedia message, and GPRS settings
automatically.
Your device has two internal antennas.
11
Getting started
file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml
Page 11
Jul 2, 2004 11:32:12 AM
file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml
Page 11
Jul 2, 2004 11:32:12 AM