automatically connects to the GSM network
when you switch on the car ignition.
When you activate the remote SIM access profile, you
can use applications on your device that do not need
network or SIM services.
To make connections between your device and the car
kit without separate acceptance or authorisation,
select
Menu
>
Control panel
>
Connectivity
>
Bluetooth
, and open the paired devices tab. Select the
car kit and
Set as authorised
, and answer
Yes
to the
confirmation query. If the car kit is set as unauthorised,
connection requests from it must be accepted
separately every time.
To end the remote SIM access connection from your
device, select
Menu
>
Control panel
>
Connectivity
>
Bluetooth
and
Remote SIM mode
>
Off
.
Wireless LAN
Your device can detect and connect to a wireless local
area network (WLAN). To use WLAN, a network must be
available in the location and your device must be
connected to it.
WLAN connections
Important:
Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the
risk of unauthorised access to your data.
To use a WLAN, you must create an internet access
point in a WLAN. Use the access point for applications
that need to connect to the internet. A WLAN
connection is established when you create a data
connection using a WLAN access point. The active WLAN
connection is ended when you end the data
connection. You can also end the connection manually.
You can use a WLAN during a voice call or when packet
data connection is active. You can only be connected to
one WLAN access point device at a time, but several
applications can use the same internet access point.
When the device is in the Offline profile, you can still
use a WLAN, if available. Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
If you move the device to another location within the
WLAN and out of range of a WLAN access point, the
roaming functionality can automatically connect your
device to another access point that belongs to the same
WLAN. As long as you remain within range of access
points that belong to the same network, your device
can stay connected to the network.
Tip:
To check the unique media access control
(MAC) address that identifies your device, for
example to configure the MAC address of your
device to a WLAN router, enter *#62209526# in
the home screen. The MAC address is displayed.
133
Co
nnect
ivi
ty
© 2009 Nokia. All rights reserved.
Summary of Contents for 002J3X4
Page 1: ......