•
Call waiting
— Set the device to notify you of
incoming calls while you are in a call (network
service).
•
Internet call waiting
— Set the device to notify
you of a new incoming internet call while you are in
a call.
•
Internet call alert
— Select
On
to set your device
to alert for incoming internet calls. If you select
Off
, you receive only a notification if you missed a
call.
•
Reject call with message
— Reject a call, and send
a text message to the caller.
•
Message text
— Write the standard text message
that is sent when you reject a call.
•
Own video in recvd. call
— Allow or deny video
sending during a video call from your device.
•
Image in video call
— Display a still image if video
is not sent during a video call.
•
Automatic redial
— Set your device to make a
maximum of 10 attempts to connect the call after
an unsuccessful call attempt. To stop automatic
redialling, press the end key.
•
Show call duration
— Display the length of a call
during the call.
•
Summary after call
— Display the length of a call
after the call.
•
Speed dialling
— Activate speed dialling.
•
Anykey answer
— Activate anykey answer.
•
Line in use
— This setting (network service) is
shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which
phone line you want to use for making calls and
sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you
select
Line 2
and have not subscribed to this
network service, you are not able to make calls.
When line 2 is selected, is displayed in the home
screen.
•
Line change
— Prevent line selection (network
service), if supported by your SIM card. To change
this setting, you need the PIN2 code.
Network settings
Select
Menu
>
Control panel
>
Settings
and
Phone
>
Network
.
To select the network mode, select
Network mode
and
Dual mode
,
UMTS
, or
GSM
. In dual mode, the
device switches automatically between networks.
Tip:
Selecting
UMTS
enables faster data transfer,
but may increase the demand on battery power
and reduce the battery life. In regions close to
both GSM and UMTS networks, selecting
Dual
mode
may cause constant jumping between the
two networks, which also increases the demand
on battery power.
To select the operator, select
Operator selection
and
Manual
to select from available networks, or
Automatic
to set the device to select the network
automatically.
To set the device to indicate when it is used in a
microcellular network (MCN), select
Cell info
display
>
On
.
153
Se
ttings
© 2009 Nokia. All rights reserved.
Summary of Contents for 002J3X4
Page 1: ......
