Nokia 002F5S8, User Manual

Page: 69 / 183

Start the route guidance outdoors. If started indoors, the
GPS receiver may not receive the necessary information
from the satellites.
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination,
and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences
in altitude are not taken into account when calculating
the distance. Route guidance is active only when you
move.
To set your trip destination, select
Options
>
Set
destination and a landmark as the destination, or enter
the latitude and longitude coordinates. Select Stop
navigation to clear the destination set for your trip.
Retrieve position information
Press , and select Tools
>
Connectivity
>
GPS
data
>
Position .
In the position view, you can view the position
information of your current location. An estimate of the
accuracy of the location is displayed.
To save your current location as a landmark, select
Options
>
Save position . Landmarks are saved
locations with more information, and they can be used in
other compatible applications and transferred between
compatible devices.
Trip meter
Press , and select Tools
>
Connectivity
>
GPS
data
>
Trip distance .
Select Options
>
Start to activate trip distance
calculation, and Stop to deactivate it. The calculated
values remain on the display. Use this feature outdoors to
receive a better GPS signal.
Select
Reset to set the trip distance and time and average
and maximum speeds to zero, and to start a new
calculation. Select Restart to set the odometer and total
time to zero.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
Positioning (GPS)
© 2008 Nokia. All rights reserved. 69