Cutting sizes: EN-12F4
20
The cutting sizes are defined by the gear wheels used in ensiling machine model EN-12F4.
The following figures show all the possible cutting options and the corresponding gear wheels.
The gear wheels 4 and 32 (optional) are not supplied with the machine, but they can be purchased
from a Nogueira Reseller.
How to change the cutting option (models: EN-9F3B, EN-12B e EN-12F4)
1- Remove the gearbox cover
B
, press upwards.
2- Remove the cotter pins from the two gear wheels
C
.
3- Remove the two gear wheels
C
and place the set recommended for the desired cutting size.
Remember to replace the cotter pins.
4- Replace the cover
B
.
fig.37
fig.37A
fig.38
fig.38A
optional
CUTTING OPTIONS:
Instruction manual