Cutting sizes: EN-6800
Unloader nozzle-chute
22
Ensiling machine model EN-6800, the cutting sizes are defined by the positioning of the pulley belts,
as shown in the following illustrations.
The unloader nozzle-chute adjusts the direction of the blast and it turns 360 degrees. To adjust the
nozzle-chute, see the following instructions and figures:
TURNING THE NOZZLE-CHUTE
: move the TURNING ARM.
POINTING THE BLAST
: move the ACTUATOR.
HOW TO CHANGE THE CUTTING SIZE
(only in model: EN-6800)
Invert the pulley wheel axle to change the cutting sizes
(fig.42).
fig41
fig.42
fig43
fig44
TURNING ARM
High Nozzle
Low Nozzle
TURNING ARM
BLAST DEFLECTOR
ACTUATOR
BLAST DEFLECTOR
ACTUATOR
CUTTING OPTIONS:
Instruction manual