11
APPLICATION
PICK-UP NOZZLE-CHUTE
WHAT IS SUPPLIED WITH THE MACHINE
NEVER OPERATE THE ENSILING MACHINE
WITHOUT THE PROTECTIVE COVER.
ACTUATION
The Nogueira Ensiling Machines were designed
for shredding forages plants which were
previously harvested, such as: sugarcane,
glasses, sorghum, corn etc., used for making
forage for silage or daily animal feed.
Before installing the nozzle-chute in the
machine, the protective shield cover must be
installed. The cover was designed to guarantee
safety during operation, preventing hands from
reaching pick-up rollers, thus avoiding
accidents.
- Screw the protective cover on the Nozzle-
Chute.
- Instruction manual;
- Pick-up and unloader nozzle-chutes (they are
unassembled);
- PTO Driveshaft (only for tractor actuated
models);
- Number 8 and 16 cutting adjustment gears
(only for models EN-9F3B, EN-12B e EN-12F4).
- Do not let anybody remove the protective cover.
The actuation options are available with
accessories actuated by high or low RPM
electric motors, diesel or gasoline motors, tractor
power take-off (category II), which at least 30 HP
and 540 RPM.
Note:
The actuation method depends on the
ensiling machine model and the accessories
used, which are ordered based on your specific
need.
The EN-6180 model is available only actuated
by high RPM electric motor.
The power requirements for actuation are listen
i n t h e s e c t i o n o n T E C H N I C A L
SPECIFICATIONS, on this manual.
PROTECTIVE
COVER
fig.05
fig.06
fig.07
þ
ý
SILAGE CHOPPERS
E
n
g
li
s
h