15
Electric motor actuation (continuation)
Models: EN-9F3B / EN-12B / EN-12F4 /
EN-6400 / EN-6500 / EN-6600 / EN-6700F4 /
EN-6800.
The metallic stand for assembling the electric
motor in the ensiling machine is equipped with
special rubber feet which do away with the need
for fastening the assembly to the ground.
1- Place the machine on the metallic stand, in the
place displayed in the above figure. Fasten the 4
feet to the stand rails.
7- Install the pulley belts. Stretch the belts using
the stretcher present on the stand.
PULLEYS AND BELTS: Consult this topic in
“TECHNICAL CHARACTERISTICS on this
manual.
2- Place the motor on the stand rails (as
displayed in the above figure).
3- Align the pulleys (machine/ motor).
4- Fasten the motor to the rails using the screws,
washers and nuts.
5- Connect the motor to the electricity network.
6- Test the rotation direction before installing the
pulley belts.
ASSEMBLY:
fig.20
fig.23
fig.24
fig.21
fig.22
MOTOR
MACHINE
STRETCTER
SILAGE CHOPPERS
E
n
g
li
s
h
