Noblelift RT16P, Service Maintenance Manual

Page: 14 / 50

12
•
The truck is intended to be used on hard and flat ground indoors whose roughness
should be within 1cm/m
2
;
•
The operator should hold driving license and have been trained;
•
When operating the truck, the operator has to wear safety shoes.
•
The truck is intended to be used with ambient temperatures b5

C~+40

C;
•
The operating lighting must be minimum 50 Lux.
4. COMMISSIONING, TRANSPORTING, DECOMMISSIONING
a.
Commissioning
After receiving our new reach truck or for re-commissioning you have to do following before (firstly)
operating the truck:
•
Check if all parts are included and not damaged
•
Mast installation (please follow the instructions to install mast);
•
Do the work according to the daily inspections as well as functional checks.
•
Check battery installation and charge instructions (follow chapter 7).
Mast assembling:
Mast assembling required equipment:
Lifting equipment:
Driving ( 5 tons maximum load ) or fork lifting ( 3 tons load capacity and 4.5 m lifting height)
Assistant tools: S24 wrench, crowbar.
Safety precautions:
Assembling operators must take appropriate training or be trained by professional personnel on-site to
guide the assembling operation.
Operators for lifting equipment must get appropriate operating qualifications.
If the truck is directly forked on the crossbeam of the gantry, the gantry must be tied together with the
protection rope to avoid the danger of slipping.