Noblelift RT16P, Service Maintenance Manual

Page: 22 / 50

20
m.
Emergency
In emergencies, keep safe distance immediately. If possible push the emergency button (1). All
electrical functions will stop.
If the truck fails to lower the fork after the fork is lifted to the high altitude, please use a 6mm
Allen-wrench to unscrew the screw (emergency descent) shown in the figure below to lower the fork.
7. BATTERY CHANGES AND REPLACEMENT
•
Only qualified personnel are allowed to service or charge the batteries. The instructions of this
handbook and from the battery- manufacturer must be observed.
•
The batteries are liquid acid traction batteries. Optional maintenance free batteries might be
available; for these batteries re- filling is prohibited.
•
Recycling of batteries undergoes national regulations. Please follow these regulations.
•
By handling batteries, open fire is prohibited, gases could cause explosion!
•
In the area of battery charging neither burning materials nor burning liquids are allowed.
Smoking is prohibited and the area must be ventilated.
•
Park the truck securely before starting charging or installing/changing the batteries
•
Before finishing the maintenance work, make sure, that all cables are connected correctly and
that there are no disturbing towards other components of the truck.
•
In the process of charging or operating, due to water evaporation, check the electrolyte weekly,
the battery should be added distilled water regularly, the electrolyte level must be maintained
between the highest and the lowest level, charging after filling distilled water.
Distilled water supplement and filling quantity shown as below:
Fig. 11: Electrolyte level