Noblelift RT16P, Service Maintenance Manual

Page: 20 / 50

18
OPERATING A TRUCK WITH THIS KIND OF SYSTEM
You steer the truck by turning the aiming circle clock wise and anti-clock wise. Turn the
aiming circle to make the drive wheel move straight, and reach full speed. Turn the
aiming circle a certain angle to turn the drive wheel. When turning, the angle is larger than
±
10
°
, comparing with straight driving, the speed will be different when turning, the speed
will is more smaller if the turning angle is much larger.
e.
Braking
THE BRAKING PERFORMANCE DEPENDS ON THE TRACK CONDITONS AND THE LOAD
CONDITONS OF THE TRUCK
•
When drive the truck, if the right foot release the accelerator pedal, the truck begins to slow down. If
you need a shorter braking distance, please directly step on the brake pedal until it stops;
•
Release the safety pedal switch (6), the truck can stop.
•
Press the emergency switch (1), the truck can stop.
Attention: when the fork is loaded with goods, the brake should be operated slowly. Do not use
emergency button please in case of the goods falling.
f.
Load curve diagram
The Load curve diagram indicates the maximum capacity Q [kg] for a given load centre c [mm] and the
corresponding lift height H [mm] for the truck with horizontal load.
The white mark on the mast indicates if the specific lifting limits reached.
For instance with a load centre of gravity distance c of 600 mm and a maximum lift height of 10500 mm,
the maximum capacity Q for RT20P is 800 kg.
g.
Lifting
DO NOT OVERLOAD THE TRUCK! THE MAXIMUM CAPACITY IS 2000 KG AND 1600 KG
REFERRING TO THE ID PLATE.
Fig. 10: Load curve diagram