InSight Radar (IR2) (IR2-HD2 and Higher Models)
Nobeltec
37
Installer’s Guide
The PC Connection
5. Now click on the Internet Protocol (TCP/IP) item in the list and then on the Properties
button as shown. This final step opens the Internet Protocol (TCP/IP) Properties window
(below right).
Figure 4.5—Connection windows
6. Once in the
TCP/IP Properties
window, click on the option labeled
Use the following IP
address. Then In the address field, type the following information
:
IP Address
192.168.0.100
Subnet mask
255.255.255.0
Tip
: In the event that your computer already has a local connection with the
IP address listed above, change the last three digits of the IP address from 100
to any number between 002 and 099.
Once this data has been entered, hit the OK button to close all the screens. You may
have to reboot the computer for the changes to take effect.
Once you’ve verified the IP settings are correct, go to the step titled: Using the Radar
Setup Wizard.
Connection Status
Window
Connection
Properties Window
TCP/IP Properties
Window
Summary of Contents for IR2-HD2
Page 2: ......
Page 8: ...Page intentionally left blank...
Page 81: ...Page intentionally left blank...
