Nobeltec IR2-HD2, Installer'S Manual

Page: 34 / 82

InSight Radar (IR2) (IR2-HD2 and Higher Models)
26
Hardware Installation Installer’s Guide
Power Supply Requirements
Supply voltage used Maximum current drain Allowable voltage range
12 VDC 5A (IR2-HD2)
5A(IR2-4D)
6A(IR2-4x)
7A (IR2-6x)
8A(IR2-12x)
10.2 to 41.6V
24 VDC
(required for double speed
support in Nobeltec Admiral)
2.5A (IR2-HD2)
2.5A (IR2-4D)
3A(IR2-4x)
3.5A (IR2-6x)
4A(IR-12x)
5.4A (IR2-25x)
18.6 to 41.6V
Caution
: AC power supply cannot be used.
Plug the included power supply cable into the connector on the Control Box
labeled “Power”. Make sure to place the fuse and connector in a dry splash-free area.
When extending the cable, use a suitable cable as indicated below.
Supply voltage used Cable Conductor Cable Max Length
12 VDC 12 Gauge 25 Feet
10 Gauge 60 Feet
24 VDC 12 Gauge 70 Feet
10 Gauge 120 Feet
Figure 3.17—Cable #2: Power supply cable