Use and maintenance
7
4. DESCRIPTION
4.1 Unpacking
Check that the packaging is unopened and
undamaged; otherwise immediately inform the
forwarding agent or the area agent.
To take the machine out of the packaging
proceed as follows:
1.
Cut and remove the plastic straps;
2.
Remove the staples from the top of
the box;
3.
Open the box and take out the copy
of the instruction manual which is on
top of the polyurethane protection;
4.
Continue as indicated in the manual;
5.
Push the upper cardboard box down
(1) using the flaps so that the next
step is easier, that is, removing the
polyurethane protection and the
corner reinforcements (2);
6.
Remove
the
above
mentioned
protection
and
the
corner
reinforcements;
7.
Lift and take out the machine which is
wrapped in a sheet of transparent
polyethylene;
ATTENTION
: The machine must be lifted by two
people, taking into account that it weighs more
on the side where the knife is.
8.
Once this operation is over, check the
contents of the box and make sure it
corresponds to the label on the
outside.
WARNING
: The packaging components (plastic
straps, cardboard, polyurethane foam) can be
thrown away with normal solid wastes and
therefore there is no difficulty in disposing of
them. However it is advisable to dispose of
products separately (differential collecting) in
conformity with theregulations in force for
adequate recycling.
DO NOT DISCARD THE PACKAGING PRODUCTS
IN THE ENVIRONMENT!
1
2
