Use and maintenance
13
6.2 Cleaning the slicing machine
6.2.1 General information
The machines must be properly cleaned at least
once a day; if necessary even more.
If the machines have not been used for a while they
must be cleaned before use as well.
6.2.2 Disassembling machine for cleaning
1. Disconnect the plug from the electric mains
supply;
2. Turn the index knob of the thickness plate to ‘0’;
3. Remove the various components as described in
the following paragraphs.
Disassembling the food table
1. With the index knob of the thickness plate on ‘0’
pull back the plate holder support all the way
towards the operator;
2. Turn the locking knob counterclockwise all the
way while keeping the support at the end until the
safety device of the thickness plate can be heard.
WARNING: To correctly carry out this operation it
could be necessary to move the thickness index
knob at the same time taking it 1-2 mm over the
‘0’ position.
3. Take out the whole group by pulling it upwards.
Disassembling the knife cover
1. Completely unscrew (counterclockwise) the
tension rod knob of the knife cover block;
