ETU400 User Guide 011603
9-6
Transferring a Host File to Multiple Micros
The PWRFROM3XB command allows you to transfer a single host file to up to
ten micros with one command. To transfer a file to multiple micros,
specify the name of the host file to be transferred, the name of the
micro file to which the data will be transferred, and the device names of
the micros to which to transfer the data. The parameters used with
PWRFROM3XB multiple-device transfers are described below.
FRMFILE
The name of the host file that you want to
transfer.
Qualified File Name
The name of the file on the micro to which to
transfer the file. Any path name you enter must
already exist on the micro (ETU does not create
subdirectories).
MICLIST
The device name of the target micro. The default,
*REQUESTER, transfers the file to the micro from
which you initiate the command.
To transfer the file to multiple micros, enter
the name of each device. (You must be authorized
to use each device you specify in the MICLIST
parameter. If you can sign on to the device, then
you are authorized to use it.) Enter a plus sign
( ) and press ENTER to display multiple MICLST
prompts.
Each target device must be powered on, have
emulation loaded, and have the AS/400 sign-on
screen displayed.
NOTE:
This parameter must be changed from
*REQUESTER when you run the PWRFROM3XB command in
batch mode.
Summary of Contents for ETU400
