Nlynx ETU400, User Manual

Page: 74 / 314

ETU400 User Guide 011603
5-14
Transfer Host Programs to the Host:
The PGMTO3XB command transfers executable host programs from a file on
the micro to the host. This command transfers only those executable host
programs from the micro that were originally transferred to the micro
with the PGMFROM3XB command.
To transfer a host program from a microcomputer, supply the name of the
microcomputer file that contains the program, and the name of the host
program and library to receive the file.
If the program name (USERPGM) already exists in the library you specify,
you will be prompted with this information and asked to delete the
existing program or cancel the transfer request.
No translation is necessary when you use this command. That's because the
program you are transferring from the micro will already be in EBCDIC and
will remain in EBCDIC on the host.
NOTE: The PGMTO3XB command is no longer compatible with versions of ETU
prior to version 5.02. If you've transferred a program to the PC using a
previous version of ETU, you cannot transfer it back to the AS/400 using
ETU 400 version 5.02 or later.
Figure 5-8 The PGMTO3XB prompt screen
Transfer micro file to 3X pgm: (PGMTO3XB)
Type choices, press Enter.
Qualified file name: . . . . . .
Library name: . . . . . . . . . QGPL Character value
Display status messages ?: . . . *YES *YES, *NO
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys