Nlynx ETU400, User Manual

Page: 70 / 314

ETU400 User Guide 011603
5-10
Transferring a PC Print File to the Host:
The PRTTO3X command allows you to transfer PC-DOS print files to the host
and add them to a host output queue.
For this command, supply the PC file name, the host output queue name,
and optionally, host printer information such as lines per inch,
characters per inch, and number of copies.
Once you have supplied the information, ETU will transfer the file to the
host and add the file to the AS/400 output queue that you specify. The
file will print when it reaches the top of the output queue, unless you
put a hold on it by entering *YES in the HOLD parameter.
NOTE: Always use the translation table member ATOE3 in file
TRANSLATE with this command. This table transfers print files from ASCII
to EBCDIC.
Figure 5-6 The PRTT03X prompt screen
Spool file from micro to host: (PRTTO3X)
Type choices, press Enter.
Qualified file name: . . . . . .
Output queue: . . . . . . . . . Name
Library name: . . . . . . . . *LIBL Name, *LIBL
Form length--lines/page: . . . . 66 1-255
Lines per inch: . . . . . . . . 6 6, 8, 4, 9
Characters per inch: . . . . . . 10 10, 12, 15
Form width: . . . . . . . . . . 132 1-198
Overflow line number: . . . . . 63 1-255
Form type: . . . . . . . . . . . *STD Character value, *STD
Number of copies: . . . . . . . 1 1-99
Hold spool file: . . . . . . . . *NO *YES, *NO
Translation table file name: . . TRANSLATE Name
Library name: . . . . . . . . *LIBL Name, *LIBL
Translation table member name: ATOE3 Name
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys