Nlynx ETU400, User Manual

Page: 39 / 314

ETU400 User Guide 011603
3-4
The ETU Main Menu
The ETU commands are split between two menus, the Main menu and the
Utilities menu. The Main menu, shown in Figure 3-1, displays when you
issue the command WSMENUS. It contains an option for each file transfer
command. In addition, it also contains an option that displays the ETU
Utilities menu, and an option that signs you off the AS/400.
The right side of the Main menu is reserved for user-defined functions,
which are site-written commands that the system administrator can assign
to the ETU Main menu. A user-defined function might be a menu option
that, when selected, starts a non-ETU related program. Your system
administrator can add any user function to the ETU Main menu. If no user
functions have been added, the right side of the menu is blank, as it
appears below in Figure 3-1.
For information on adding user-defined functions to the Main menu, see
the command EDTUDF (edit user-defined functions) in the Chapter 10, ETU
Command Reference.
NOTE: The menu options 7 through 10 (for the ETU power commands) display
on your menu only if you have been granted authority to them, or if you
have special authorities granting access to all objects.
Figure 3-1 The ETU Main Menu
Menu - WSMENUS Emulator Transfer Utility AS/400 NLRISC
NLRISCLIFF COPYRIGHT (C) 1998 - NLynx Systems
ETU Functions
1. Host file to PC file
2. Host program to PC file
3. Host spool file to PC prt file
4. PC file to Host file
5. PC file to Host program
6. PC prt file to Host spool file
7. Power Host file to PC file
8. Power PC file to Host file
9. PC from PC
10. PC to PC
20. ETU Utilities Menu
90. SIGNOFF
OPTION OR COMMAND
===>
F3= Exit F4= Prompt F9= Retrieve
F6= DSPMSG