Nivus NivuFlow 750, Instruction Manual

Page: 133 / 162

Diagnostics
NFM 750 - rev. 03 / 27.05.2020 page 133
50 Simulation
DANGER Effects on plant sections
The simulation of NivuFlow Mobile outputs will directly affect any following plant sections
without any safety locking measures.
Observe the hints contained within the warning on page 129!
Stop the simulation with “Back”.
This menu allows simulation of theoretical flow. Simulation is carried out by entering assumed
level and velocity values. These values do
not really exist.
Use either the >--<, >-<, >+< or >++< fields to enter smaller steps or specify absolute values
(higher steps) directly in the >Velocity< field.
-- = Decreases the level by 0.01 m or the velocity by 0.01 m/s per step
- = Decreases the level by 0.001 m or the velocity by 0.001 m/s per step
+ = Increases the level by 0.001 m or the velocity by 0.001 m/s per step
++ = Increases the level by 0.01 m or the velocity by 0.01 m/s per step
By using the simulated values (based on the channel dimension parameters set) NivuFlow
Mobile calculates the prevailing flow.
Choosing >Flow< automatically indicates the calculated value.
>DO 1< shows the currently selected function.
The >Analog Output< option will output the voltage at the previously determined output.
Fig. 50-1 Simulation