Nivus NivuFlow 750, Instruction Manual

Page: 129 / 162

Diagnostics
NFM 750 - rev. 03 / 27.05.2020 page 129
47 Diagnostics Menu Inputs and Outputs
47.1 Important Information on the Simulation
DANGER Personal injury and damage caused by improper simulation handling
The simulation will directly affect following plant sections. Disregarding may lead to person-
al injury or damage your facility.
The simulation shall be executed by trained electricians only who shall have sound
knowledge on the entire control procedures of the according facility.
Prepare the simulation process carefully!

Switch the following systems to manual operation.

Disable actuating drives and similar or limit the according functions.
It is absolutely necessary to have a safety person available!
DANGER Effects on plant sections
The simulation of NivuFlow Mobile outputs will directly affect any following plant sections
without any safety locking measures.
Observe the hints contained within the above warning!
Important Note
NIVUS herewith in advance refuse any responsibility for any possible damage to persons
or objects at any extent due to the extremely high risk of danger and unforeseeable conse-
quences in the event of incorrect or faulty simulation!
This menu is divided in analog inputs, analog outputs, digital inputs and digital outputs.
Fig. 47-1 Menu Inputs/Outputs
•
>Analog Inputs<
Indicates the current values available at the according analog inputs.
•
>Analog Outputs<
Indicates the available voltage values and the detected medium temperature.
By checking the Simulation box it is possible to simulate a voltage (Fig. 47-1).
Necessarily observe the previous safety information on the simulation and the
possible risks (effects on following plant sections) on page 129!