Nivus NivuFlow 750, Instruction Manual

Page: 114 / 162

Instruction Manual
NivuFlow Mobile 750
page 114 NFM 750 - rev. 03 / 27.05.2020

>Test settings< : Use this menu to verify the settings, the results can be viewed
in >Diag Output<.

>Start Data Transmission< : Data (error information, archived data and current
values) is transmitted, the result is issued on >Diag Output<.
40 Parameter Menu Display
Use the display menu to determine main screen attributes.
Variable settings:
•
Names of the five main screen output fields
•
Decimal places of individual values
Fig. 40-1 Main screen and output fields
Output Fields
The five main screen output fields (Flow, Level, Velocity, Temperature and Total) can be
specified freely in terms of name and the number of decimal places.
Assignment of values and output fields
The assignment of values and fields cannot be changed.
Example: the “Flow” field will always indicate output values even if the name should be
changed to “Temperature”.

Procedure to change the name:
1. Drop down the desired output field.
2. Uncheck >Standard Name<.
3. Specify the new name. The name can be selected freely, however more than
16 characters will not be accepted.
The new name does
not change the field value in the main screen.
4. Go “Back” several times to save the parameters

To save see chapter “33.1 Save Parameters”.

Procedure to change the number of decimal places:
1. Drop down the desired output field.