Instruction Manual
NIVUS Full Pipe
page 50
NFP - rev. 04 / 23.05.2018
Fig. 29-8
Logic and name
>Function<
A function is assigned to each digital input selectable with the >left<
or >right< keys. Default: >Not active<.
The functions below are available:
>not active<
Digital input is without function
>stop v-
measurement<
The digital input is used to release/lock the
measurement by external control signals
(such as flood message, threshold for detec-
tion start or similar).
>Measurement ctrl.<
In hydraulically critical applications it is pos-
sible to externally switch over between oper-
ation modes >cyclic (pump)< / >cont. opera-
tion< via the digital input.
>Logic<
Toggle between inverse and non-inverse mode.
Default: >not inverted<
>Name<
The digital input name may consist of up to four characters which will
be indicated on main screen as well as in the overview menu. The
procedures are the same as described in the measurement names
chapter (see chapter “29.1 Parameter Menu “Measurement Place””).
Ensure reliable contact
The digital input is passive and hence shall be supplied with 24 V DC. The signal current is
10 mA.
Ensure reliable contact by using appropriate materials for relay or end switch contacts.
Summary of Contents for NFP
