Parameter Setting
NFP - rev. 04 / 23.05.2018
page 59
30
Signal Input/Output Menu (I/O)
This menu includes several submenus which both serve to assess and to check sensors as
well as to control signal inputs and outputs. It allows to indicate various values (current values
of inputs and outputs, relay conditions, echo profiles, individual velocities etc.), however does
not enable to influence signals or conditions (offset, adjustment, simulation or similar). The
menu therefore primarily serves in order to assess the parameter settings and for error diag-
nosis.
Indication of all theoretically possible inputs and outputs
The menu basically allows indicating any input and output theoretically possible even if it
might not be connected or available.
This menu is not capable of detecting defects on relay or D/A-converter but only indicates
the peripheral control signals.
Fig. 30-1
I/O sub menu
30.1 I/O sub menu “Digital Inputs”
This menu enables to view the digital status of the transmitter’s input terminal. It is distin-
guished between logical “OFF” and “ON”.
Fig. 30-2
Indication of digital input status
Summary of Contents for NFP
