prw2101a0600p_01
55 / 105
Identifier of the transmitter
Number of „Time-window TOT” and time of start
Total flow
Average flow
Maximum flow with time
Minimum flow with time
2: SE-300 151
Tnnn: 2010.01.12-09:13
TOT: 15689 l
Qave: 12.56 l/s
Qmax: 54.23 l/s
2010.01.12-11:23
Qmin: 4.53 l/s
2010.01.12-13:56
2:SE-300 142
Q1: 458.56 l/s
2010.01.13-15:25
Q2: 418.13 l/s
2010.01.14-07:47
Q3: 356.98 l/s
2010.01.22-23:01
Identifier of the transmitter
Highest flow with time
2
nd
highest flow with time
3
rd
highest flow with time
5.4.8.2
Time-window TOT (Total flow logging)
This function is only available for NIVELCO manufactured transmitters operating in flow measurement mode (for this option NIV129 should be selected in
“Main menu”/”MultiCONT conf.”/”HART”/”Command set”). Within the selected time interval MultiCONT counts the total flow (TOT), the average flow (Qave) and
monitors the maximal and the minimal flow. Length of this time interval should be entered (in minutes) in LP3 parameter in the “Parameters” menu point. Up to 256
time-windows can be stored.
Read logging data: “Main menu”/”MultiCONT conf.”/”LOG”/”Show time window TOT”
↑
,
↓
, OK and
→
buttons are used for stepping in the list (OK moves down 10 lines,
→
moves up 10 lines in the list)
T000 is the unfinished “Time-window 1”. T001 is the last finished time-window. Increasing nnn, the time can be incremented. nnn=0…255
5.4.8.3
Time-window FM (Flow Maximum logging)
This function is only available for NIVELCO manufactured transmitters operating in flow measurement mode (for this option NIV129 should be selected in
“Main menu”/”MultiCONT conf.”/”HART”/”Command set”). The 8 highest values of the flow are stored with time within the selected time interval in LP3 parameter in
the “Parameters” menu point.
Read logging data: “Main menu”/”MultiCONT conf.”/”LOG”/”Show time window FM”
↑
and
↓
buttons are used for stepping in the list.
Summary of Contents for MultiCONT
Page 2: ...prw2101a0600p_01 2 105 ...
