prw2101a0600p_01
40 / 105
5.4.2.
EXT detect:
For detection of, external expansion (Relays, Current Output, or Combined) modules if available.
The query process is similar to that of the DEV detect mode, the only difference being that the modules that get into the list remain in an inactive state.
(See 5.2.3 Putting the MultiCONT into operation)
The detected relays or current outputs (4-20 mA) will placed at end of the Detected EXT list.
5.4.3.
Main Display:
The main display consists of 3 parts: „Main display”, „List display” and „Status field” See 5.10 .
Among these, the „Main display” and „List display” can be freely selected for each device.
The quantity to be displayed and the rounding of the decimal part can be set in the „Main display”.
This is where to configure the stepping of the results of the transmitters on the display.
n: S 300
E
-11
M
FLOW
A
06:41
2006.04.11
5 486
.
m
Code of the device error
or "Locked" message if
program protecting switch is on
No. of error logs
Acknowledge, (delete)
with
SV: 0.852 m
LEV: 0,514 m
TOT1: 1542 m3
TOT2: 1.25 E7 m3
Main display
List display
Status
field
Err11
Errors: 4
PV
l/s
(no errors)
(max 4 rows)
A = absolute time
R = relative time
2
Status
field
(on error)
Actual date& time
Summary of Contents for MultiCONT
Page 2: ...prw2101a0600p_01 2 105 ...
