manualshive.com logo in svg

NIVELCO AnaCONT LE-100, Installation And Programming Manual, Page: 40 / 61

Share
Download
NIVELCO AnaCONT LE-100 Installation And Programming Manual Download Page 40

40 / 60 

 le00100a0600p_05 

 BKI 11 ATEX 0012 X

 

 

6.3.

 

P

ROGRAMMING WITH THE 

SAP-300

 DISPLAY MODULE

 

When entering the menu the instrument makes a copy of the actual parameters, all changes are done to this duplicated parameter set. During programming the 
instrument keeps measuring and transmitting with the current (and intact) parameter set. After exiting the menu the instrument replaces the original parameters with 
the new parameter set and will measure according the new parameters. This means that the change of the parameters does not become immediately effective when 
pressing the 

E

 button! 

 
Entering the menu can be done by pressing the 

E

 button while exiting the menu can be done by pressing the   button. 

If the instrument is left in programming mode after 30 mins it will automatically return to measuring mode. If the SAP display is removed during programming the 
instrument immediately returns to measuring mode. 
 
As programming with SAP-300 (manual programming) and HART (remote mode) programming is not possible at the same time use only one programming method 
at a time. Measured values can be read out through HART at any time 
 

6.3.1.

 

Components of the programming interface 

The parameters of the instrument are grouped according to their functions. The programming interface consists of lists, dialog windows, edit windows and report 
windows. 

Lists 

Navigation between the lines of a list can be done by pressing   /   buttons. Pressing the 

E

 button 

activates a list item. Selected list item is marked with inverse colour. Exit from a list by pressing the   button. 

Menu list 

Menu list is a specialized list. Its characteristic is that upon selecting a list item we directly get into another list, 
and these lists are opening from each other in different levels. 
The menu header (1) helps to navigate.

 

Entering the menu can be done by pressing the 

E

 button. Navigation between the menu items can be done 

by pressing the   /   buttons. Enter to the selected menu by pressing the 

E

 button. The selected list item 

is marked with inverse colour. 
Exit from a submenu with   button. Pressing the   button in the main menu will exit programming mode and 
the instrument will return to measuring mode. 

 

Summary of Contents for AnaCONT LE-100






























































Reviews:

No comments