Nitto ATRA ACE WA-3500, Instruction Manual

Page: 11 / 20

10
5-4. Mounting/Removing Cutter
WARNING
●
Do not use any other combinations of Pilot
Pin and cutter than those shown in the
compatibility table.
●
Wear safety gloves when replacing cutter.
(1) Bring the Drill Motor up by turning the Rod Handle
clockwise. (Fig. 10)
Fig. 10
(2) Insert a Pilot Pin,
appropriate for the cutter
size, into the cutter.
(Fig.11)
(3) Align the depression in
the cutter with the white
line on the Sleeve, and
then insert the cutter.
When you insert the
c u t t e r f a r e n o u g h
the Sleeve will turn
clockwise and lock with
a clicking sound..
* W h e n y o u f i n d i t
h a r d t o i n s e r t t h e
cutter, turn the Sleeve
counterclockwise and do
over. (Fig.12)
(4) To remove the cutter,
t u r n t h e S l e e v e
counterclockwise.
The cutter will come off.
(Fig.13)
5-5. Preparation of Cutting Oil
Cutting Oil Safety Precautions
WARNING
(1) Use
●
Use Cutting Oil for cutting purpose only. Do not use
it for household purposes
(2) Handling Precautions
●
The Cutting Oil contains amine. Do not mix it up
with rust inhibitor, etc. containing nitrite.
●
Wear safety glasses for eye protection when
handling Cutting Oil: eye injury may results if it gets
into your eyes.
●
Wear protective gloves for hand protection when
handling Cutting Oil: skin injury may result if it
comes into contact with your skin.
●
Wear respirator when exposure to respiratory
hazards with oil mist or vapor is anticipated.
Inhalation of oil mist or vapor may make you feel
sick.
●
When diluting Cutting Oil, follow the instructions per
the Operation Manual.
●
Keep Cutting Oil out of reach of children.
●
Do not drink Cutting Oil.
(3) First Aid
●
If Cutting Oil gets into your eyes, immediately open
your eyelids with your fingers and wash your eyes
with plenty of water for at least 15 minutes. If your
eyes feel irritated, consult with a medical doctor and
follow his/her instructions.
●
If Cutting Oil comes into contact with your skin,
immediately wash it away with plenty of water and
soap. Take off contaminated clothes. Clean the
clothes if you need to wear it again. If your skin
feels irritated, consult with a medical doctor for
medical instructions.
●
If someone inhales oil mist or vapor, immediately
take him/her to an area where fresh air is abundant
and wrap up his/her body with a blanket, etc. to
keep body temperature. Have him/her take a
rest and consult with a medical doctor for medical
instructions.
●
If someone drinks Cutting Oil, immediately make
him/her drink plenty of water and vomit it. Consult
with a medical doctor for medical instructions. When
unconscious, do not pour water into his/her mouth
nor induce him/her to vomit.
(4) Instructions in Case of Fire
●
If fire breaks out in the vicinity, wear PPE (personal
protective equipment) and use foam, powder or
CO
2
fire extinguisher to put the fire out from the
windward.
Rod Handle
Downward
Upward
Pull down out of the body
Fig. 11
Fig. 12
Fig. 13
Pilot pin
Cutter
Spindle Arbor
Turn the Sleeve
to the left
Spindle Arbor
Pull out
Sleeve
White line
Depression
Align
Sleeve