3
work can become loose. This can cause severe
injuries. Always secure all work.
●
Always use a vice or a clamp. Do not attempt to
hold any work piece with your hand. Attempting to
hold a work piece with your hand may cause severe
injuries. Always use a vice or clamp to hold the work
piece.
●
Always secure your drilling machine. Improperly
mounted drilling machine can come loose. This can
cause severe injuries. Always secure the drilling
machine.
Avoid Clutter
●
Always stay clear of other objects. Cluttered work
areas cause accidents. Always keep a clean work
area and stay away from other objects.
Always Remove Spanner Wrenches and
Adjustment Tools
●
Always remove spanner wrenches and adjustment
tools after adjustments have been made to the
drilling machine. Always remove all adjustment tools
before using the drilling machine.
Always Use a Cutter that is Appropriate for Your
Work
●
Always use a cutter that is appropriate for your
work. Avoid heavy-duty work that is the beyond the
capacity of your drilling machine. If the work exceeds
the capacity of your drilling machine, this can cause
accidents and severe injuries. Always use the
drilling machine in accordance with its performance
specifications.
SAFE HANDLING
●
Never leave the magnetic drilling machine
unattended while it is running. When the machine
is unattended, disconnect the power source. Do
not leave the work area until the machine comes to
a complete stop. Operating the machine while it is
unattended can case accidents that may result in
severe injuries.
HOW TO STORE YOUR MAGNETIC DRILLING
MACHINE
●
Always store the machine in a dry area.
●
Always keep the machine out of the reach of
children.
HOW TO CARRY YOUR MAGNETIC DRILLING
MACHINE
●
Disconnect the power and turn off the machine
whenever you carry the machine.
MAINTENANCE
Do not take apart or modify your magnetic drilling
machine.
●
Do not attempt to disassemble or modify your
magnetic drilling machine.
●
Do not modify your magnetic drilling machine.
Modifications can cause accident and severe
injuries.
●
All service and repairs must be performed by an
authorized Nitto dealer. Any attempt to service or
repair the machine yourself may result in an accident
and severe injuries.
Check all Parts for Damage.
●
Always inspect the magnetic drilling machine before
use.
●
Always check that the pilot pin and cutter are in
good condition. Use of the machine with worn pilot
pins or worn cutter can cause accidents and severe
injuries.
●
Inspect all cutter before you put them on the
magnetic drilling machine.
●
Do not operate the magnetic drilling machine with a
damaged or worn cutter. Do not operate the machine
with a damaged or worn pilot pin. Do not operate the
machine with any damaged accessory. Operating
the machine with any damaged part or accessory
can cause accidents and severe injuries. If there is
any damage to the magnetic drilling machine do not
operate the machine. Take it to an authorized Nitto
Dealer for repair.
●
Always have the magnetic drilling machine repaired
at an authorized Nitto dealer. Always take the
magnetic drilling machine to an authorized Nitto
dealer for service, repair and replacement parts. If
you cannot locate an authorized Nitto dealer near
you, please contact your sales representative.
●
Always use Nitto genuine parts. The use of improper
or non-Nitto parts can cause accidents and severe
injuries. Never use unauthorized parts. To obtain
genuine Nitto parts, contact your sales agent.
●
Do not remove any nameplate from your magnetic
drilling machine. Do not remove any labels from
your magnetic drilling machine. If any label or
nameplate is damaged contact your sales agent for
a replacement.
POWER TOOL SAFETY
WARNING
●
Always make sure that the machine is properly
grounded. If the machine is not properly grounded,
someone can get an electric shock.
●
If you have any doubt about the grounding of
the magnetic drilling machine, contact a licensed
electrician.
●
Never connect the grounding conductor to a gas
Summary of Contents for ATRA ACE WA-3500
Page 9: ...8 3 PART NAME Fig 8...
