67
66
Copying/Erasing
Data Management
DS Wireless Communications
Copy or delete software or save data from your System Memory or from an SD Card.
When copying data you must insert an SD Card.
Select where the data you want to delete or copy
is located.
1
Setting DS Wireless Communications
Turn wireless communications on and off.
Adjust the brightness of the screens.
While playing a game, you can press and hold
SELECT then use the volume control to adjust the
brightness.
Use caution when using SELECT to make adjustments as pressing SELECT in certain
games may activate game functions or cause the game to skip scenes.
Simply touch ON to turn wireless communications
on and OFF to turn them off.
1
Touch OK to confirm.
Note:
Make sure you set wireless communications to OFF
when on board an aeroplane.
2
Adjusting brightness
Touch + or – to adjust the brightness.
1
Touch OK to confirm your adjustments.
2
Select the data you want to copy or delete.
2
Select either COPY or DELETE.
3
You cannot copy under any of the following circumstances:
•
When there is no SD Card in the SD Card Slot.
•
When there is not enough space available in the area to which you want to copy.
•
When the data you have selected cannot be copied.
•
When you want to copy to the
Nintendo DSi Menu
but there are no available boxes.
•
When you want to copy to a system that is not where the original data is saved.
•
When the SD Card you want to copy to contains 300 blocks or more of
software or save data.
•
When the SD Card you want to copy to is write protected.
About Screen Brightness and Battery Life
Increasing screen brightness will decrease battery life, and decreasing screen
brightness will increase battery life. Please bear this mind when you adjust your
brightness settings.
Press and
hold
Screen
brightness
Bright
Dark
Page 111
➜
Brightness Settings
1
2
1
2
TWL_MAN_AUS_AppsSection.qxp 09.1.19 2:22 PM Page 66
