Nilfisk-ALTO NEPTUNE 5-46 PE, Service Manual

Page: 45 / 94

F
NEPTUNE PE-DE_en_Ver.1.0_October 2010
Service / Repair
45
Fig.F.24: Pistons Fig.F.23: Valve Kit 3~ - Exploded View
Fig.F.21: Cylinder block
Cylinder Block
Fig.F.22: Oil Sleeves
•
Overview of the placement of the parts in
the cylinder block.
•
Take out the oil sleeves using an
adequate screwdriver.
•
Be careful not to damage the surface of
the cylinder block.
Oil seal and piston
NEW !
•
To make replacement easier moisten the
sleeves with soapy water.
•
Mount the sleeves using a 19mm box
spanner and a fiber hammer.
•
Place sleeves, pistons and springs as
shown.
•
Mount the cylinder block to the D-bearing
cover by the two 6mm mounting screws.
NA5 Pump
Jetwash Direct ltd