8/00 revised 6/01 Form No. 56040724 (page 1 of 13)
© 2001 Printed in USA, Nilfisk-Advance, Inc.
56410193 PRESWEEP / DUST CONTROL KIT
For Advance Hydro-Retriever™ 3800 (models 56410000, 56410350) / Nilfisk BR 1100 (models 56410002, 56410351)
CONTENTS OF KIT
ITEM
REF. NO.
QTY
DESCRIPTION
56040724
1
Instruction Sheet
*
N/A
1
Presweep Assembly
D
56454538
2
Circuit Breaker, 15Amp
E
56459367
2
Boot, Reset
* = Refer to illustrated parts breakdown directly after these installation instructions for replacement parts.
INSTALLATION INSTRUCTIONS
WARNING!
DISCONNECT BATTERIES BEFORE SERVICING.
FIGURE 1
FRONT
D
E
B
C
A
1
See Figure 1. Remove the (6)
(A)
Screws and remove
Panel
(B)
from the machine. Remove and discard the (2)
(C)
Plugs.
2
Install the (2)
(D)
Circuit Breakers and the (2)
(E)
Reset
Boots as shown.
3
The wiring for these two circuit breakers is pre-installed in
the machine, it only needs to be connected.
4
The circuit breaker directly next to the 10Amp circuit breaker
is the pre-sweep circuit breaker. The RED and WHT/GRN
wires should be connected to it. The RED and RED/GRN
wires should be connected to the other 15Amp circuit
breaker which is the dust control breaker. Re-install the
Panel
(B)
.
