© 2000 Printed in USA
4/98 revised 7/00 Form No. 56040637
1
FRONT
2
3
4
5
B
D
A
C
C
56407236 HEADLIGHT KIT
For
Advance Hydro-Retriever™ 3200 / Hydro-Retriever™ 3800 (model 56410000)
Nilfisk BR 850 / BR 1100
CONTENTS OF KIT
ITEM
PART NO.
QTY
DESCRIPTION
56040637
1
Instruction Sheet
1
56409239
1
Headlight
256409557
1
Headlight Guard
3
56003179
1
Scr, Hex Thd To Hd M8-1.25 x 20mm
4
56003389
1
Nut, Hex Nyl Loc M8-1.25
5
56321540
1
Grommet
6
56172230
2
Terminal Tab .25 Ins
INSTALLATION INSTRUCTIONS
WARNING!
DISCONNECT BATTERIES BEFORE SERVICING.
1
Turn the key switch OFF and
Disconnect the Batteries
.
2
Remove the (4)
(A)
Screws and remove the Front Panel
(B)
.
3
Remove the (2)
(C)
Button Plugs from the Front Panel
(B)
.
4
Install the Grommet
(5)
into the bottom hole as shown.
5
Insert the wires from the Headlight
(1)
through the Grommet
(5)
and then secure the Headlight to the Front Panel
(B)
as shown, using the
Screw
(3)
and Nut
(4)
from the kit. Snap the Headlight Guard
(2)
over the Headlight
(1)
as shown.
6
Connect the (2) Terminal Tabs
(6)
to the Headlight wires.
7
Connect the single BLACK Wire from the Headlight
(1)
to the double BLACK Wire from the Wiring Harness.
8
Connect the single RED Wire from the Headlight
(1)
to the double WHITE/BROWN Wire from the Wiring Harness.
9
Re-install the Front Panel
(B)
on the machine and re-connect the batteries.
10
Test the Headlight
(1)
for proper operation by turning ON the Key Switch and pushing the Power Switch
(D)
on the Headlight
(1)
.
