Nikon Scan User Manual Download Page 54

Page: 54 / 57

- 54 -

Using the ADF (Auto Document Feeder)

When the optional ADF (Auto Document Feeder) is fitted to
the AX-110 or AX-210, the ADF submenu appears at the
bottom of the Media Type menu.

Choose any one of the following from the ADF submenu.

ADF Off:

Disables the ADF. The document positioned
on the document setting glass will be scanned.

ADF On US Letter:

Enables scanning of letter-sized documents
placed on the ADF.

ADF On US Legal:

Enables scanning of legal-sized documents
placed on the ADF.

Note:

When the AF-10 Auto Document Feeder is attached to

your scanner, automated continuous scanning is available with
applications supporting continuous acquire, such as Photoshop
version 3 or above or EasyPhoto 1.5. Continuous scanning can be
initiated by clicking the

Scan

button in the Main Dialog Box while

holding down the

Option

key.

Summary of Contents for Scan


























































Search results

Summary of Contents for Scan

Reviews:

Related manuals for Scan

Brands by name

Popular brands

Nikon Scan, User Manual

Search results

Summary of Contents for Scan

Reviews:

Related manuals for Scan

Brands by name

Popular brands