Nikon SB-910 User Manual Download Page 98

Page: 98 / 136

–16

Functions

Flash Photography with Color Filters

White balance depends on camera in use

■

Camera

Filter

D3X, D3S, D3

D700, D300S, D300

D90, D7000, D5100,
D5000, D3100,
D3000

D2 series, D1X, D1H,
D200, D100, D80,
D70 series, D60,
D40 series

D1, D50

SZ-2FL

Auto,

ash

Not recommended

SZ-2TN

Auto,

ash*

Incandescent

FL-G1, FL-G2

Auto,

ash

Not recommended

TN-A1

Auto,

ash

Incandescent (

tune +3), +1.0 EV*

Not recommended

TN-A2

Direct sunlight (

tune +3), +0.3 EV*

Color

lters

(RED, BLUE,
YELLOW,
AMBER)

Auto,

ash, direct

sunlight

Auto,

ash, direct

sunlight (+0.7 EV*

with AMBER)

Auto,

ash, direct

sunlight (+0.7 EV*

with AMBER)

*1 D3 camera with

rmware A and

rmware B version 2.00 or later.

*2 D300 camera with

rmware A and

rmware B version 1.10 or later.

*3 To match the compensation effects of the SZ-2TN and the TN-A1 or TN-A2, set

auto or

ash in the camera’s white balance and A6 in the

ne tuning.

*4 Set the camera’s white balance and

ash compensation value.

Please check the image results and adjust the flash compensation value and other

•

settings accordingly.

Summary of Contents for SB-910









































































































































Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands

Nikon SB-910, User Manual

Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands