Nikon SB-910 User Manual Download Page 40

Page: 40 / 136

–1

Flash Modes

Flash Modes

i-TTL Mode

Information obtained by monitor pre-

ashes and exposure control information is

integrated by the camera to automatically adjust

ash output levels.

To take pictures using the SB-910 set in i-TTL mode, see “Basic Operations”

•

(

B-6).

Either the i-TTL balanced fill-flash mode or the standard i-TTL mode option is

•

available.

i-TTL balanced fill-flash

The

ash output level is automatically adjusted for well-balanced exposure of the

main subject and background.

appears on the LCD.

Standard i-TTL

The main subject is correctly exposed regardless of background brightness. This is
useful when you want to highlight the main subject.

appears on the LCD.

Camera’s metering mode and i-TTL mode

When the camera’s metering mode is changed to spot metering while i-TTL

•

balanced fill-flash is in use, the i-TTL mode automatically changes to the standard
i-TTL mode.
The i-TTL mode automatically changes to i-TTL balanced fill-flash, after changing

•

the camera’s metering mode to matrix or center-weighted.

Summary of Contents for SB-910









































































































































Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands

Nikon SB-910, User Manual

Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands