Nikon SB-910 User Manual Download Page 122

Page: 122 / 136

–11

Tips on Speedlight Care and Reference Information

Optional Accessories

External power source

Use of an optional external power source provides a stable power supply, increases
the number of

ashes and shortens recycling time.

Nikon High-
performance Battery
Pack SD-9

Power Bracket Unit SK-6/
SK-6A

Nikon DC Unit
SD-7

Nikon High-
performance Battery
Pack SD-8A

Batteries are required in the SB-910 body even when an external power source is

•

used.
Use of other external power source brands may cause accidents, or could damage

•

the Speedlight components. Nikon cannot guarantee the Speedlight performance
when used with non-Nikon products.

Connecting to an external power source

To use an external power source, remove the external power source terminal cover
and connect the power cord to the terminal.

Do not use Power Cord SC-16 when connecting the SB-910 to the Nikon DC Unit

•

SD-7; use the SC-16A instead.

Using High-performance Battery Pack SD-9

Conducting continuous

ash photography at 8 fps using the SD-9 with eight

batteries can cause the front part of the

ash head to heat up.

Summary of Contents for SB-910









































































































































Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands

Nikon SB-910, User Manual

Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands