Nikon SB-910 User Manual Download Page 63

Page: 63 / 136

–2

Wireless Multiple Flash-unit Photography

Advanced Wireless Lighting

The master

ash unit commands the remote

ash units to

re monitor

pre-

ashes.

The camera measures the re

ected light.

The camera activates the

ash units.

Remote

ash units

(Group A)

Remote

ash units

(Group C)

Remote

ash units

(Group B)

Master

ash unit

mounted on camera

The SB-910 mounted on a camera is the master flash unit.

•

Up to three groups (A, B, C) of remote flash units can be set up.

•

Single or several remote flash units can be allocated for one group.

•

The master flash unit and each remote flash unit group can operate with a flash

•

compensation value and a flash mode that is different to the other flash units or
groups.

Summary of Contents for SB-910









































































































































Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands

Nikon SB-910, User Manual

Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands