C
–7
C
Flash Modes
Auto Aperture Flash Mode
Taking a picture in auto aperture flash mode
Make sure the actual
fl
ash-to-
subject distance is within the
effective
fl
ash output distance
range.
Con
fi
rm the
fl
ash-ready
indicator is on, and then shoot.
v
When insuf
fi
cient
fl
ash output for correct exposure is indicated
When the
fl
ash-ready indicators on the SB-910
and in the camera’s view
fi
nder blink for approx.
3 seconds after a picture is taken, underexposure
due to insuf
fi
cient
fl
ash output may have occurred.
To compensate, use a wider aperture or higher
ISO sensitivity, or move the
fl
ash unit closer to the
subject and reshoot.
t
Checking exposure before taking a picture
Test
fi
re the Speedlight under the same conditions
and with the same Speedlight and camera settings
before taking the actual picture.
When the flash-ready indicators blink after test
•
firing, underexposure due to insufficient flash
output may have occurred.
