Nikon SB-910 User Manual Download Page 80

Page: 80 / 136

–19

Wireless Multiple Flash-unit Photography

Remote Flash Units

An obstacle between the master flash unit and remote flash units can interfere

•

with transmission of data.
Take care not to let light from the remote flash units enter the camera lens or the

•

master flash unit light sensor for non-TTL auto flash.
Use the provided

•

Speedlight Stand AS-21 for stable placement of remote flash

units. Attach and detach the SB-910 to and from the AS-21 in the same way it is
attached to/detached from the camera’s accessory shoe.

Be sure to press the master flash unit test firing button to test fire remote flash

•

units after setting up.
Be sure to confirm the remote flash unit flash-ready indicator is on before

•

photographing.

Summary of Contents for SB-910









































































































































Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands

Nikon SB-910, User Manual

Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands