Nikon SB-910 User Manual Download Page 104

Page: 104 / 136

–22

Functions

Flash Photography Support Functions

SU-4 type wireless multiple

ash-unit photography

■

(

D-12)

When the camera’s depth-of-field preview button is pressed, only the master flash

•

unit fires as the modeling illuminator.
The remote flash units also fire according to the modeling illumination of the

•

master flash unit, but these are not modeling illuminations.

Standby function

If the SB-910 and camera are not used for
a speci

ed time, the standby function is

automatically activated to conserve battery
power.

The standby function is activated when

•

the camera’s exposure meter is turned off
(default setting).
The standby activation lead time can be

•

adjusted with the custom settings (

B-18).

To cancel standby

Press the camera’s shutter-release button halfway.

•

Turn the power switch/wireless mode switch for multiple flash units to [OFF], and

•

then turn to [ON], [REMOTE] or [MASTER].
Press the test firing button.

•

Summary of Contents for SB-910









































































































































Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands

Nikon SB-910, User Manual

Search results

Summary of Contents for SB-910

Reviews:

Related manuals for SB-910

Brands by name

Popular brands