Nikon P-FLA2, Instructions Manual, Page: 27 / 43

E-7
Be sure to always follow these guidelines.
CAUTION
1. Turn off the power before assembly, connecting or
disconnecting the cords and exchanging lamps.
To prevent electrical shocks or malfunction, turn off the power of
the power supply and unplug the power cord before assembly,
connecting or disconnecting the cords and exchanging lamps.
2. Do not wet the microscope.
If the power supply or other part becomes wet, a short circuit may
result that could damage it or make it extremely hot. If you
accidentally spill liquid on the power supply or other parts,
immediately turn off the power switch of the power supply and
unplug the power cord. Then, use a piece of dry cloth to wipe
away any moisture.
If any liquid or foreign matter gets inside, do not use the product
but contact your nearest Nikon representative.
3. Cautions on assembly.
Be careful not to pinch your hands or fingers during assembly.