manualshive.com logo in svg

Nikon DTM-502 Series, Instruction Manual

Share
Download
Nikon DTM-502 Series Instruction Manual Download Page 137

 

4-2-3. Delete data by Station 

Move the cursor to the ST record you are to delete 
and press the [DEL] softkey. 
 
 
 

3

MENU: 

4. Data

 
A confirmation screen is displayed. 
Press the [ENT] key or [Yes] softkey to proceed. 
 
 
 
 
A reconfirmation screen is to be shown. 

There is no undelete function on the instrument.

  

If you want to clear data, press [DEL].  ([ENT] key 
does not work on this screen.) 
 
 

[DEL] 

 
All observations from the ST you selected are 
cleared. 
 
 
 
 
 
 
 
 
 

•

  When you delete a ST record, all the observation data from the ST is also deleted. 

It is the same in both [1.RAW data] view and [3.ST 

→

 SS/SO/CP] data view 

functions.

 

 

4-3. Edit Records 

You can edit the point number/name and code of point records.  Also the height of 
target (HT), height of instrument (HI), backsight point (BS), and backsight azimuth 
(Az) can be edit. 

 

 
 
 

•

  There is no edit CD field for SO/F1/F2 records. 

•

  HA/VA/SD cannot be changed. 

3-111 

Summary of Contents for DTM-502 Series










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands