Nikon D5200 User Manual Download Page 345

Page: 345 / 370

228

Error Messages

This section lists the indicators and error messages that appear in the viewfinder and
monitor.

Warning Icons

A flashing

in the monitor or

in the viewfinder indicates that a warning or error message

can be displayed in the monitor by pressing the

(

) button.

Indicator

Solution

Monitor

Viewfinder

Lock lens aperture ring at
minimum aperture (largest
f/-number).

(flashes)

Set lens aperture ring to minimum aperture
(highest f-number).

19,

200

Lens not attached

(flashes)

•

Attach non-IX NIKKOR lens.

199

•

If non-CPU lens is attached, select mode

Shutter release disabled.
Recharge battery.

(flashes)

Turn camera off and recharge or replace
battery.

2, 14

This battery cannot be used.
Choose battery designated
for use in this camera.

(flashes)

Use Nikon-approved battery.

209

Initialization error. Turn
camera off and then on
again.

(flashes)

Turn camera off, remove and replace battery,
and then turn camera on again.

2, 14

Battery level is low.
Complete operation and turn
camera off immediately.

—

End cleaning and turn camera off and
recharge or replace battery.

217

Clock not set

—

Set camera clock.

16,

173

No SD card inserted

(flashes)

Turn camera off and confirm that card is
correctly inserted.

Memory card is locked.
Slide lock to “write” position.

(

(flashes)

Memory card is locked (write protected). Slide
card write-protect switch to “write” position.

This memory card cannot be
used. Card may be damaged.
Insert another card.

(

(flashes)

•

Use approved card.

211

•

Format card. If problem persists, card may
be damaged. Contact Nikon-authorized
service representative.

168

•

Error creating new folder. Delete files or
insert new memory card.

127

•

Insert new memory card.

•

Eye-Fi card is still emitting wireless signal
after

Disable

has been selected for

Eye-Fi

upload

. To terminate wireless transmission,

turn the camera off and remove the card.

176

Summary of Contents for D5200



















































































































































































































































































































































































Search results

Summary of Contents for D5200

Reviews:

Related manuals for D5200

Brands by name

Popular brands

Nikon D5200, User Manual

Search results

Summary of Contents for D5200

Reviews:

Related manuals for D5200

Brands by name

Popular brands