E
8
Refere
nce S
ect
io
n
Taking 3D Pictures
The camera takes one picture for each eye to simulate a three-dimensional image
on a 3D-compatible TV or monitor.
•
The two captured images are saved as a 3D picture (MPO file) consisting of the
left and right eye images. The first image (the left eye image) is also saved as a
JPEG file.
•
Pictures taken in this mode are saved at an image size of
n
(1920 × 1080).
1
Set the shooting mode to
3D photography
.
•
See “Scene Mode (Shooting Suited to the Scene)” (
40) for information about
setting the shooting mode to
3D photography
.
2
Frame the subject and release
the shutter.
•
The camera focuses at the center of
the frame. The focus area can be
changed with the touch shutter or
touch AF/AE option (
38).
•
The focus, exposure, and white
balance are locked after the first shot, and
R
is displayed on the monitor.
•
The first picture is taken, and a translucent guide for taking the second picture is
displayed in the frame.
3
Move the camera horizontally to the
right until the guide is aligned with
the subject.
•
To cancel shooting, tap
H
.
4
Wait for the camera to release the shutter with the subject aligned
with the guide.
•
The camera automatically takes the second picture when it detects that the subject is
aligned with the guide.
•
Shooting is canceled if the subject is not aligned with the guide within ten seconds.
1
290
1
290
Summary of Contents for CoolPix S100
