211
Accessories
6
Press and hold (for at least 3 seconds) the power button on the
remote control.
•
Pairing starts for the camera and remote control. During the process, the status
lamp on the remote control flashes about every 0.5 seconds.
•
When pairing is complete, a connection is
established between the camera and the
remote control. When you enter shooting
mode,
M
is displayed on the shooting screen.
•
If a pairing failure message is displayed,
perform the procedure again from step 5.
Switching the Connection to a Smart Device
•
Switch the connection from
Remote control
to
Smart device
in
Choose
connection
in the camera network menu (
•
When the SnapBridge app is launched on your smart device, and a connection is
established between the camera and smart device,
L
is displayed on the shooting
screen.
•
When establishing a wireless connection with a smart device for the first time, see
the included “SnapBridge Connection Guide”.
1 / 2 5 0
1 / 2 5 0
F 3 . 4
F 3 . 4
5 0 0
5 0 0
2 5 m 0 s
2 5 m 0 s
0 . 0
0 . 0
1 0 0
1 0 0