209
Accessories
Status Lamp on the Remote Control (for COOLPIX A1000)
4
Power button
Press the button to turn on the remote control and
search for a camera that has already been paired.
Press and hold the button (for at least 3 seconds) to
search for a new pairing camera. To turn off the
remote control, press the button again.
5
Status lamp
Indicates the remote control status or shooting
session status, based on the color and behavior of
the lamp. See “Status Lamp on the Remote Control
(for COOLPIX A1000)” (
209) for more information.
6
Shutter-release button
Functions similarly to the shutter-release button on
the camera.
•
Half-press and press-and-hold operations are not
available.
•
When using the self-timer, you can press the
button during the countdown to cancel shooting.
7
k
(apply selection) button
Applies the selected item. When adjusting manual
focus, press this button to stop focusing.
8
w
1 (Function 1) /
w
2
(Function 2) buttons
Cannot be used with this camera.
Color
Status
Description
Green
Flashing about every second
Remote control is searching for a camera
that has already been paired.
Green
Flashing quickly (about every
0.5 seconds)
Pairing process is being performed.
Green
Flashing about every 3 seconds
Connection is established between
remote control and camera.
Orange
Flashes once
Still image shooting starts.
Orange
Flashes twice
Still image shooting ends (
Time-lapse
movie
,
Multiple exp. Lighten
).
Red
Flashes once
Movie recording starts.
Red
Flashes twice
Movie recording ends.
Control
Function
